Like much of your home’s infrastructure, your plumbing likely occupies very little of your thoughts until there’s a problem. While some issues are obvious and emergencies, others are a little more subtle but still impactful. Learn about seven of the most common plumbing problems in Mount Pleasant, TX, that you may run into regardless of the age of your home.
While a slow drip may not seem like a big deal, it can have a massive impact. Not only does this increase your water bill, but it can permanently stain your sinks and damage your faucet.
This is often caused by a gasket or O-ring in the handle that fails to shut the water off completely. Corrosion in the faucet fixture or improper installation can also lead to this issue.
Toilets That Won’t Shut Off
It’s common to flush the toilet and then walk away to wash your hands and move on to other tasks. However, when your toilet continues running, you’re wasting a lot of water and increasing your costs with no benefit. That can add up to over 200 gallons of water every day from a single toilet continuing to run.
There are several issues that cause toilets to continue running longer than they should, and all reside in the tank. This could be a problem with the flapper not sealing properly, a corroded handle or issues with the refill tube.
Drain issues include your toilet, bathroom, kitchen and utility sinks. Often, these drain problems arise from something going down the drain that shouldn’t and creating a blockage. In simple cases, you may be able to solve a clogged drain with a plunger.
However, if that doesn’t work, call in a professional to work through the issue. Avoid using chemical drain cleaners and augers, since both can cause damage if not used properly, leading to substantial repairs.
Water Heater Issues
Water heater issues are probably one of the most common plumbing calls, especially if you have an aging unit. This leads to a lack of hot water throughout your home in addition to possible water around your unit.
Common water heater complaints include heating element issues, internal corrosion, sediment buildup, improper installation or the wrong size unit. Call a professional to resolve water heater issues quickly to avoid possible injury or property damage.
Low Water Pressure
A lack of water pressure anywhere in your home is merely a symptom of a more significant problem. Your water system should maintain pressure, which is part of how it keeps bacteria from developing in your pipes.
Oftentimes, low pressure means there’s a leak somewhere in your system. This can cause sanitation issues throughout the system, not to mention water damage. It may also indicate corroded supply lines with buildup in the lines restricting the water flow to your appliances.
It can be very difficult to find the issue when the symptom is low water pressure. If you don’t see signs of a leak, then call a professional plumber to track down the issue.
Sewage backups are disgusting to deal with and can be troubling to solve. The problem could be anywhere from your drain lines to the sewer line or a septic problem.
Resolving sewage backups can take a bit of investigation and may turn up unexpected results. This can be anything from tree roots invading the sewage lines to a broken and leaking drain pine somewhere. Solving the problem often means investigating with special equipment to visualize the pipe until you locate the source issue.
Leaking pipes are an obvious plumbing issue, though they may not be as clear cut as it may seem. Copper pipes may leak over time, especially if you have hard water. However, that’s not the only cause for leaks.
Rather, any pipe can leak given the right conditions. The causes may include:
- Cracks in the pipes or seals.
- Damage to the joints.
- Excessive pressure.
- Tough clogs.
Plumbing issues can ruin your home and your day. Call to schedule your plumbing repair appointment with the professionals at Wood Air Conditioning & Plumbing today.
Image provided by iStock